by ep | Sep 4, 2026 | applications
Specifying roller chain for high-temperature conveyor applications — industrial ovens, powder coating lines, bakery tunnel ovens, paint curing conveyors, and heat treatment furnaces — requires addressing the specific effects that elevated temperature has on chain...
by ep | Sep 4, 2026 | applications
A roller chain drive that reverses direction presents design challenges that do not exist in a unidirectional drive. In a standard forward-running drive, the tight side is always the top strand and the slack side always the bottom strand. In a reversing drive, the...
by ep | Sep 4, 2026 | applications
Specifying roller chain for a vertical drive or elevator application requires attention to geometry and dynamic factors that do not apply in standard horizontal drives. The chain must support its own weight in the vertical span, cannot rely on gravity for slack-side...
by ep | Sep 4, 2026 | applications
When roller chain wears out faster than expected, the chain itself is rarely the root cause. The most common hidden driver of premature chain wear is a sprocket condition problem — worn tooth profile, incorrect tooth count for the pitch, or a sprocket not running...
by ep | Sep 4, 2026 | applications
The question of sprocket replacement frequency relative to chain replacement is one where field practice and engineering guidance diverge significantly. The most common field practice is to replace the chain every season or when it reaches 3 percent elongation, and to...
